Quality Equipment for the Technical Rope Professional

The Scarab® represents five years of research and testing. It was born out of the need for a small, simple device that could easily control heavy rescue loads and excel at pick-offs, twin rope systems, and other general rescue techniques. The Scarab® does all this and more. With two models available, the Scarab® is the perfect choice for both Fire/Rescue and backcountry rescue environments.

The Scarab has endured over five years of drop and slow pull testing and extensive heat and wear studies utilizing Conterra's Capstan Test Bed. The frame and crossbars strength is greater than 40kN. In real-world tests with Nylon rescue ropes, the ropes fail at the nose of the Scarab® at about their knotted strength (just like most other descent control devices). When pulling a 12.7mm rescue rope on a tied-off Scarab®, the rope breaks at about 27kN, easily exceeding the 22kN NFPA G requirement for descent control devices. In addition to a battery of slow pull and drop tests, the ScarabÃî has undergone extensive heat and wear studies. One device was tested by pulling over a mile of dirty rope through it under rescue-sized tension, with temperature reading thermocouples being monitored at several locations during pulls. At 2kN of tension and a lowering speed of 10M per minute, the Scarab® maintained a frame temperature of about 100 degrees C. To our knowledge, the Scarab® is the only descent control device tested to this degree.

This product can expose you to chemicals including nickel acetate which is known to the State of California to cause cancer.

For information go to: www.p65warnings.ca.govt